Product Description SBR Buffings/Base Shredded Rubber - 55Lb Bag

BULK SAVINGS!!!

For use as base layer with Poured In Place EPDM Granular Rubber.

Click on the link in "Bulk Pricing" above to see the incredible bulk discounts.

• Buy 5 - 10 and get 10% off
• Buy 11 - 20 and get 20% off
• Buy 21 or above and get 30% off

PIP Cheat Sheet

• It is recommended that you order 5%-10% overage on rubber and glue. This will allow for unlevel site conditions, possible wavy subgrade variances, workmanship, and priming of subgrade.
• A “Base” Primer may be desirable using a mixture of 50% Binder/50% Acetone. On edges and around posts where extra adhesion may be necessary, a more aggressive “Edge” Primer ratio of 80% Binder/20% Acetone can be used.
• PIP cannot be installed on dirt and requires a sub-base of concrete, asphalt, or properly compacted stone/gravel. As PIP is porous, proper drainage is essential.
• It is the customer’s responsibility to determine the required fall height of any/all existing or future playground equipment.
• The Mixing and Installation of PIP Surfacing should be performed by a professional or an experienced technician.
• PIP should be installed at proper depths to meet current ASTM/HIC (Head Injury Criteria) standards. Customer is responsible for determining fall heights of playground equipment and all project fall height requirements.
• Discount Playground Supply HIGHLY recommends having your completed surface 3rd Party tested for Head Injury Criteria and compliance for your required fall height

WARNING: Cancer and Reproductive Harm -